This 1.8 inch TFT color LCD display has 128x160 pixels and uses 4-wire SPI for communication. It has its own pixel addressable frame buffer, so it can be used with any microcontroller, even ones that have very little memory and few pins available.
These versatile displays are useful in a variety of applications, including car navigation systems and smart home devices. Sinocrystal offers a variety of models to suit your needs.
Resolution
This 1.8 inch TFT LCD display module features a 128x160 pixel resolution, is a 4-wire SPI, and has its own pixel-addressable frame buffer. This makes it compatible with any microcontroller, even those that only have a few GPIO pins available. This LCD also comes with the ST7735R driver chip which supports full 18-bit colour.
This standard 1.8" transmissive TFT LCD has a resolution of 128x160 pixels, a 6:00 optimal viewing angle, and standard LED backlight brightness at 350 nits. It is ideal for projects that require visual output but do not need touch functionality.
This LCD is suitable for use with Node32-Lite boards, but you'll need to do a bit of setup work first to get the screen working. See this tutorial for more information. For more details please visit Wholesale 0.9 Inch lcd
Power
This is a general LCD display Module, 1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface. The display is based on ST7735S LCD drive IC with 18-bit color pixels and has a high contrast ratio and wide viewing angle. It can be easily controlled by microprocessors, like Raspberry pi, Arduino etc. Its serial SPI interface only needs 5 wires (CS, RS, SCL, SDA) for control and read data, no soldering is required.
Since the 3.3V logic of the display is not compatible with the 5V signals on the Arduino GPIO pins, you must add a level-shifted resistor between the GPIO lines and this display. Also, you must use a library such as UTFT or Adafruit to properly work with this display. For more details, please see the documentation and example code provided on DropBox.